publicação cruzada de: https://lemmy.world/post/33514874

Hi there fellow people,

I was building an Aurora Sofle_v2 and I may have screwed things up. I melted one of the RGBs with the soldering iron and in the process of trying to remove it the solder pad was removed as well

After that I tried to “fix” it a handful of times, and now I believe that the connectors might be gone =(

Is there a way for me to salvage this RGB? (Or perhaps to link the previous one with the following one on the chain, so at least it works for the others)

I was thinking of connecting things using cables, is this an option?

Update: Bodge wiring worked! I got some spare cable pieces I had laying around and soldered it to the board The back doesn’t look pretty, but at least it’s lighting up (except the last RGB where I accidentally soldered two pins together, after this I’m not going through the troubles to fix it)

  • Mitchie151@lemmy.world
    0·
    10 days ago

    You normally just use very tiny wire. Anything is technically fine but certain types make it easier. Generally something solid core, 30-40AWG. Some people have a specific preference for Kynar or Teflon but there’s no hard and fast rules.

    • tequinhu@lemmy.worldOP
      1·
      10 days ago

      I see, the tiny wire I had was the problem then, it has multiple filaments that kept going off

      I’ll try this one today!